The Baofeng is only Part 90 approved operation.
Brad NK8J
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of kf8sj@aol.com
Sent: Monday, May 27, 2013 8:13 AM
To: chirp_users@intrepid.danplanet.com
Subject: Re: [chirp_users] Baofeng UV5R dtmf on receive///more
ok. thanks for lead.
checked it out. seems to come in around $110.00, which is a little more than slightly. uv5r plus is out there for $49.50
canot find anywhere including factory site where this unit is approved for fcc part 20 operation. appears to be ham only unit. capable of out of band operation.
we are trying to stay legal. the uv5r is listed for part 20 useage.
looks like it has the tone capability i need. and everything else looks good. but need the part 90!
-----Original Message-----
From: tyler neff <pyrolisys@hotmail.com>
To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com>
Sent: Sun, May 26, 2013 4:04 pm
Subject: Re: [chirp_users] Baofeng UV5R dtmf on receive///
Check the TH-UVF1 it will dtmf and is only slightly more
On May 26, 2013, at 9:57, kf8sj@aol.com wrote:
thanks. would appreciate any help possible. with the advent of narrow banding, all our pagers will not work. we are paged out by the sheriffs department over a public government channel using the dtmf codes. have already explored their sending either a different pl tone, or a dcs signal, but their system is not capable
of doing either. for the price of a handfull of pagers, could equip the entire department with these units, and gain a talk around radio.
not sure what an Arduino sketch is
73 jim studer kf8sj
-----Original Message-----
From: Tom Morris <blueneon@gmail.com>
To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com>
Sent: Sat, May 25, 2013 7:40 pm
Subject: Re: [chirp_users] Baofeng UV5R dtmf on receiveNot implemented on the radio firmware. I have an Arduino sketch that may help, I'll send it tomorrow
Tom Morris, KG4CYX
Mad Scientist, Miami Children's Museum
This message sent from a mobile device. Silly typos provided free of charge.
On May 25, 2013 8:36 PM, <KF8SJ@aol.com> wrote:
i have need to use this radio as an alert pager for local vol. fire dept. see where to enable dtmf on transmit, but no capability to do so on receive. is this possible, and/or am i missing something in the programming.
basically need to receive only one tone.
thanks for help. jim kf8sj
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users_______________________________________________chirp_users mailing listchirp_users@intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_users
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
_______________________________________________chirp_users mailing listchirp_users@intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_users_______________________________________________chirp_users mailing listchirp_users@intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_users
____________________________________________________________