Thanks for the replies. I will check the version. I have had great success with the UV-5R and UV-5R+. With this one, it could not do the read. Ill try it again. Ill also get the latest CHIRP.
Thanks again, knowing that it should work, Ill try again.
73
Tom, NØVPR
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Leo Ryan Sent: Tuesday, January 29, 2013 7:11 PM To: Discussion of CHIRP Subject: Re: [chirp_users] CHIRP and the Boafeng UV-5RA
Yes i have two radios of that type, one works, the other only half works with Chirp. However the one that works works very well. You must check your firmware version 1st, but the Chirp build at the address I am going to provide here is for a wide range of firmware. You must really follow the instructions to the letter. Find them here : http://miklor-uv5r.99k.org/ Leo Ryan On 1/29/2013 6:19 PM, Tom Reis wrote:
Heloo,
Has anyone found a way to use CHIRP with the Baofeng UV-5RA?
Thanks,
73
Tom, NØVPR
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users