It might not be /dev/ttyUSB. Go into file explorer, look at /dev and see which new entry appears when you plug in the cable.
On 31/03/2024 12:10 EDT Joel Leland via Users users@lists.chirpmyradio.com wrote:
I am using ZORIN PRO 17.1. I just upgraded from 15.something. Chirp was working just fine on the 15. I'm using a BAOFENG UV-5R. I have tried 2 different cables, which both worked before this upgrade. I am pretty sure I am doing something wrong. That is what usually happens. I have tried /dev/ttyUSB0 up to USB4 with no success. I could just have syntax wrong which is usually the case. I am not real good with the command line; i.e. I don't know a lot of commands but I do know how to get there. The attached file will show the information on the CHIRP version. It is a screen shot from the HELP prompt.
What am I doing wrong?
Thank you for your help
Joel F. Leland _______________________________________________ Users mailing list users@lists.chirpmyradio.com https://lists.chirpmyradio.com/postorius/lists/users.lists.chirpmyradio.com To unsubscribe, send an email to users-leave@lists.chirpmyradio.com To report this email as off-topic, please email users-owner@lists.chirpmyradio.com List archives: https://lists.chirpmyradio.com/hyperkitty/list/users@lists.chirpmyradio.com/
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net