John,
Thanks much and I tried another cable that snapped in more firmly and that did the trick!
Appreciate the help!
Joe A
On Fri, Mar 6, 2015 at 7:25 PM, John LaMartina JohnLa@usa.net wrote:
This may assist. Match your error message to these samples http://www.miklor.com/COM/UV_ErrorMess.php
Hope this helps.
*From:* chirp_users-bounces@intrepid.danplanet.com [mailto: chirp_users-bounces@intrepid.danplanet.com] *On Behalf Of *Joe abrahamson *Sent:* Friday, March 06, 2015 8:45 PM *To:* Discussion of CHIRP *Subject:* [chirp_users] Problems programming a BaoFeng BF-888
Well I finally got my BaoFeng UV-5 programmed with everyone's help here using Chirp. Works great and I have done it several times.
Now using the same cable was trying to do the very same thing on a BF-888 radio. Same computer, same cable and same Chirp but I did change it to the correct Radio Model when doing so.
When I do this the computer does not seem to see the radio and when I hit "OK" it goes to the "Cloning"screen and a 1/2 of a second later the "An error has occurred. No response from the radio" message pops up.
Am using the same port, same everything with no luck.
Any ideas?
Thanks,
Joe A
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com