To my understanding when you have the +/- showing it indicates you are using a non-standard split. I get that icon to and everything seems to work right for the repeater . maybe if we learn to speak Chinese it will work right! lol On Nov 5, 2015 12:38 PM, "David Buss" kd9ebr@gmail.com wrote:
I know if I'm in chanel mode, it shows me the pl code but not my offset info. But it does have the +/- icon on the screen. If I was showing frequency instead of name, I would see the frequency change when I transmit.
D. Buss KD9EBR
-----Original Message----- From: Gary Runningbear runningbear2000@gmail.com To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Sent: Thu, 05 Nov 2015 11:33 Subject: Re: [chirp_users] Freq entry
That is what I am thinking. Sometimes it also happens when I program from chirp. Just something I will have to learn to live with I guess. On Nov 5, 2015 12:31 PM, "David Buss" kd9ebr@gmail.com wrote:
If it doesn't show the offset icons then something isn't right
D. Buss KD9EBR
-----Original Message----- From: Gary Runningbear runningbear2000@gmail.com To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Sent: Thu, 05 Nov 2015 11:27 Subject: Re: [chirp_users] Freq entry
This is all very weird. In channel mode fact and offset icons do not show that channel will not operate properly . if they do show everything works as it should, at least on my uv-82. Too bad the Chinese do not understand how Americans want their radios to work. lol On Nov 5, 2015 12:19 PM, "David Buss" kd9ebr@gmail.com wrote:
Oops, forgot to say, it should work properly, just not show it.
D. Buss KD9EBR
-----Original Message----- From: Gary Runningbear runningbear2000@gmail.com To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Sent: Thu, 05 Nov 2015 11:14 Subject: Re: [chirp_users] Freq entry
Just found another problem. I enter a frequency a ct tone and an offset and save to a channel. This is in the VFO of Courts. then I go to channel mode and pull up that channel and find that the CT tone and the offset have not carried over. It is acting like a simplex frequency. did I do something wrong or miss something? On Nov 5, 2015 11:28 AM, "Gary Runningbear" runningbear2000@gmail.com wrote:
Ok. I just figured out how to add up to 5 decimal places. many thanks On Nov 5, 2015 11:23 AM, "Jim Unroe" rock.unroe@gmail.com wrote:
On Thu, Nov 5, 2015 at 11:02 AM, Gary Runningbear runningbear2000@gmail.com wrote:
In the UV 82L, when adding frequencies that have four to five digits
to the
right of the decimal point how do you get the last one or two
digits in
there?
You just type it into the Frequency cell of the memory spreadsheet editor.
If you are talking about entering the frequency into the VFO using the keypad (which has nothing to do with CHIRP), you do the following:
1 set menu 1 (STEP) to a value that is compatible with the frequency that you want to enter 2 key in the 1st 6 digits of the frequency 3 press the [^] up arrow key once
For example if you want to listen to FRS channel, 462.5625 MHz
1 Set STEP to 2.5KHZ, 6.25KHZ or 12.5KHZ 2 Key in 462562 (after entering the last 2, the frequency will be rounded off to the 1st STEP compatible frequency below the desired frequency) 3 Press the [^] up arrow key once (the display will read "462.562" followed by a very small 5)
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com