Hi Dave
Not much in the log.
Steps:
- Start Chirp - Connect to IC92 - Wait for the memories to sync - Go to Band B - It shows the value as 0.0000 for location 0 - (it is actually 5.0000) - Edit it the value to 5.0000 - The status message shows it change
I can recreate this every time.
Bottom end of the log:
User selected Icom IC-91/92AD on port COM4 Sending magic DTCS Code supported: True DTCS Pol supported: True Mode supported: True Offset supported: True Name supported: True Tune Step supported: True Name supported: True ToneSql supported: True Cross Mode supported: False Comment supported: False DTCS Code supported: True DTCS Pol supported: True Mode supported: True Offset supported: True Name supported: True Tune Step supported: True Name supported: True ToneSql supported: True Cross Mode supported: False Comment supported: False Switching from 38400 to 4800 Sending magic Sending magic Switching from 38400 to 4800
Many thanks! Mike va3mw
On Thu, Apr 19, 2012 at 9:36 AM, Michael Walker va3mw@portcredit.netwrote:
Thanks Dan
I will follow you link. I can appreciate how complicated the IC92 data stream is.
73, Mike va3mw
On Thu, Apr 19, 2012 at 9:28 AM, Dan Smith dsmith@danplanet.com wrote:
Chirp 'seem's to read all the IC92 data in live mode. What took me down this path, was that I had some repeater offsets programmed as 0.0000. When I tried to change them to 5.000, it would not take and the update was not transmitted to the radio.
The 91/92 driver is very complicated and has a few issues. However, I've got one so I should be able to reproduce and fix whatever you find.
Thoughts? Is there a log I can share with you?
Please read this and file issues accordingly:
http://chirp.danplanet.com/projects/chirp/wiki/How_To_Report_Issues
-- Dan Smith www.danplanet.com KK7DS
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users