I'll be testing the Baofeng F-11 Friday when I get it from Ed Griffin. He sends me samples to test out on my service monitors and spectrum analyzer so he can give the factory input on any problems that might be encounters so the radio does not go into production before these problems are corrected. I happened to purchase this F-11and am curious to see how it works with the daily build for Mac OSX. It works good with the Wouxun UV6D and the Baofeng will use the same cable.
Sent from my 15.4" MacBook Pro, i7 quad core
On Feb 20, 2013, at 5:05 PM, Doug Gilbert dougandsharon@tampabay.rr.com wrote:
Jim, That did it – With that CHIRP 0.3.0 version, I am able to Upload/Download my UV-5R+ channels. The other link I used was the one contained on http://miklor-uv5r.99k.org/UV5R-CHIRP.html and was the one recommended. Someone might want to correct that link for other UV-5R+ owners. It will save them mucho trouble and discouragement.
After looking at both VIP and CHIRP, I’d rather use CHIRP – it’s much more complete and seems to work better. Thanks for the assist… 73’s Doug
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Doug Gilbert Sent: Wednesday, February 20, 2013 2:09 PM To: 'Discussion of CHIRP' Subject: Re: [chirp_users] Baofeng UV-5R+Upload Error
Thanks for the reply. The only release I seem to be able to get to off the site is: chirp-daily-20121222-installer.exe. Are there other versions in other locations? Doug
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Jim Unroe Sent: Wednesday, February 20, 2013 12:45 PM To: Discussion of CHIRP Subject: Re: [chirp_users] Baofeng UV-5R+Upload Error
Doug, Use the 0.3.0 stable release or latest daily build and you should be good. Jim KC9HI
On Feb 20, 2013 12:18 PM, "Doug Gilbert" dougandsharon@tampabay.rr.com wrote: Model: Baofeng UV-5R+ Firmware: BFB297 Driver: Prolilfic 3.2.0.0 Operating System: Windows 7 Service Pack 1 Chirp: Daily Build 20121222
I just purchased the UV-5R+ and tried to connect it up to Chirp. Got through the driver installation and Chirp software install thanks to the documentation provided on MIKLOR. I am able to Download the radio parameters into Chirp fine – the “Cloning” window pops up and everything appears to show fine. However after making a frequency change to one channel and trying to Upload the changes back to the radio, I get the message: “Unsupported Firmware Version BFB301 BFB297”. This happens right after the “Cloning” window pops up.
Since there are so many variables to analyze for potential problems, I downloaded the Baofeng VIP software version: V120725 and tried the same scenario - everything seems to work fine there – Download/Upload.
Is Firmware Version BFB297 supported yet by CHIRP? Thanks, Doug
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users