Goodday
Thank you will try it
Thank you
On Sun, 29 Dec 2019, 14:41 Jim Unroe, rock.unroe@gmail.com wrote:
On Sun, Dec 29, 2019 at 5:17 AM Bennie Potgieter potgieterbarends4@gmail.com wrote:
Goodday
Im new to this,bought 4 Aofeng radios and not all of them are on the
same chanels,downloaded the Cherp software but I seem to strugle to select the usb port on my laptop,can someone maybe help me with that?
Thank you
Hi Bennie,
You won't be selecting a USB port. The programming cable has a chip inside, that when used with a compatible device driver, creates a virtual serial port which is required for CHIRP (or any programming software) to communicate with the radio.
Usually when the programming cable does not automatically show up in Device Manager under Ports (COM & LPT), it is because the chip in the cable is an unauthorized copy of a Prolific and the device driver automatically install by Windows is incompatible. When this is the case you must download, install and select an older, but compatible, device driver for it to work properly. Instructions for determining this and how to install and select the older device driver can be found here: http://www.miklor.com/COM/UV_Drivers.php
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to potgieterbarends4@gmail.com at potgieterbarends4@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com