That is one of the reasons I use Linux, I can get it in any size down to ittybitty systems that run on very minimal storage.
Asking MS to pare down Windows, is well I cannot think of a comparison. Now that they have monetized the desktop, even less...
You could go in and start yanking the fluff and junk out but you may find that you have removed something that some other software depends on.
On Tue, Jul 24, 2018 at 6:07 AM Dennis Wage dwage@dwage.com wrote:
I really like 10. But I really wish Windows would make a bare bones version of it for users who don't want the fluff.
Dennis M. Wage (W9BOQ)
245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net http://overdubs.net
On Mon, Jul 23, 2018 at 8:30 PM, mike-2007@elp.rr.com wrote:
DAN. I just thought you might want a HAPPY message. I hate upgrades, and software problems always seem to find me. But when I was dusting out my 8 y/o Win-7 (64 bit) computer I found some swelled caps on the motherboard. Hardware doesn't scare me, and I have the caps to replace them. But really, it was time to move up to Win-10. I am going from a 2.3 GHz Duo-Core processor on 2 GB of RAM to a 3.6 GHz Octo-Core processor on 16 GB of Ram, and a 128 MB SSD. The old 21" monitors are not compatible with the new computer, so I got 2 new 27" monitors. Quite a move up.
THE GOOD NEWS? I installed the DRIVER for my RT-Systems USB-62 cable. I installed CHIRP. I opened CHIRP. It found my USB-62 cable on Comm-3. I connected to my FT-817ND and downloaded my memory configuration. FIRST TRY. No Win-10 difficulties here.
Yeah - the RT-Systems cable wasn't $5. More like $25. But the value of it working first time (and every time)? PRICELESS. My time is precious too, and worth more than $20 worth of cable savings.
On to more software installations. I am sure something will give me trouble. But CHIRP and RT-Systems cables will NOT be it.
Vy73 - Mike - KD5KC. El Paso, Texas - DM61rt. SOTA W5T-Texas Association Manager. NA-SOTA info is at: http://na-sota.org/
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dennis Wage at dwage@dwage.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Chuck Hast at kp4djt@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com