just because the firmware numbers are the same it actually may be different
On Sun, Mar 6, 2016 at 10:05 PM, Bob vk2byf@gmail.com wrote:
2 Baofeng UV-5R one yellow one black.
Tried to clone them by turning on the source (yellow one) while holding down the "mon" key. The black one is connected and on. Lights come on but black one stays in factory default.
I can read the yellow one no problems Firmware BFS297 Black one, Firmware BFB297, same cable same chirp same USB port I get, "Radio refused to send block 0x0000"
I have programmed dozens of these beasties with no problem. I have programmed Wouxuns, Yaesus, Icoms, no problem but this one's got be beat.
I'm using Linux Mint 17.3 so no driver problems.
Over to the Gurus, Thanks de VK2BYF Bob _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Robert Taylor at vawing@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com