Hi Jim,
Thanks for the kind efforts but still No Joy :( Maybe I need to give it a rest for a while hihi
TallyHo Mike
On Wed, Jul 22, 2015 at 5:25 AM, Jim Unroe rock.unroe@gmail.com wrote:
On Tue, Jul 21, 2015 at 10:54 PM, Mike Raymond K5HUM@arrl.net wrote:
Ok, Im confused, The setup I mentioned works fine on my XP and W7 machines why would it not work on W8.1???
73, Mike
Mike,
Visit this page: http://www.miklor.com/COM/UV_Drivers.php
Scroll down to step 12. When the programming cable is plugged in, you should see and entry similar to the 2nd image above step 12.
If it ishows Prolific, then you must have the Prolific v3.2.0.0 driver installed as shown in the image above step 12. Follow the instructions to install and then select (as shown in steps 7 through 11) the v3.2.0.0 driver.
If is shows an FTDI chip, then the correct driver should have installed automatically. You might try uninstalling the driver using Device Manager and allowing Windows to install it again. Or you could download the latest driver from the FTDI website and install it that way. http://www.ftdichip.com/Drivers/D2XX.htm
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com