When you manually program a Baofeng, you must enter the receive frequency and it’s tone, etc first, then program the transmit frequency in the same channel. Doing the offset I believe only works manually in bro mode. See www.miklor.com for more info. 

Jardy Dawson WA7JRD
Message sent through sub space hailing frequencies using the Universal Translator. 


On Jan 21, 2019, at 11:25, Keith .Yordy <keith.yordy@gmail.com> wrote:

 I have used Chirp to setup several UV-5R units and it works fantastic! However, I was trying to setup a UV-5R with the keypad. I see in Chirp there is a setting for Duplex, but this doesn't appear to show up anywhere in the UV-5R. I have compared 462.600 simplex and 462.600 duplex and see no differences in the keypad menu system. if I was to setup a duplex channel manually, I am assuming I would have to set the offsets, etc., even though they show no differences on the UV-5R. Is there another trick I am missing?

KY 
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Jardy at jardy72@yahoo.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com