On Wed, Apr 24, 2024 at 2:11 PM Jim Unroe via Users < users@lists.chirpmyradio.com> wrote:
On Wed, Apr 24, 2024 at 4:01 PM Chris Hart via Users users@lists.chirpmyradio.com wrote:
Port used is /dev/cu.wlan-debug. I am running OS Sonoma 14.4.1
I could be wrong, but this doesn't seem like the correct port.
Jim is right, this is not the correct port. The correct port should look something like /dev/tty.usbserial-0001 instead. If you open a Terminal window and type 'ls /dev/tty*', a line like this should appear near the top of the list.
Also, in a Terminal window, if you type 'ioreg -p IOUSB' (without the quotes), you should see a line corresponding to your cable. If you don't see it, type that with the cable unplugged, then type it again with the cable plugged in, and the cable should appear.
If you're not seeing your cable with either of these, Jim's may be correct about the right driver not being available.
Martin. KD6YAM
Chris
Jim KC9HI