I have three "identical" UV5R's. I use the same image file and get the same error on 2 of them. Every thing seems to download to the radios anyhow. I think it is more of an FYI than an error message.However what has been said above is the right way to do it.
On Tue, Nov 5, 2019 at 1:59 PM John La <JohnLa@usa.net> wrote:_______________________________________________Joshua,
You appear to have mismatched firmware between radios (even with the same model number).
This is not uncommon.
You must do a Download from Radio from the second radio to create a new template for that radio.
Then copy paste the channels from one template to the other.
John
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Joshua White
Sent: Tuesday, November 5, 2019 10:41 AM
To: chirp_users@intrepid.danplanet.com
Subject: [chirp_users] FW: Problem with cloning to my radio
From: Joshua White
Sent: Tuesday, November 5, 2019 10:33 AM
To: chirp_users@intrepid.danplanet.com
Subject: Problem with cloning to my radio
Hey so I programmed my first radio identical to this one (Baofang UV82L) and it worked fine. But this second one when I try to clone all my channels on to it, it reads this: An Error has occurred, The upload was stopped because the firmware version of the image ( N822413N822413) DOES NOT MATCH that of the radio.
Please help
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Dennis Wage at dwage@dwage.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com