Perfect! Thank you very much.
Bob KK6CBL
On Mon, Sep 26, 2022 at 10:39 AM Jim Unroe rock.unroe@gmail.com wrote:
Hi Bob,
On Mon, Sep 26, 2022 at 1:09 PM Bob DeFranco bob.defranco@gmail.com wrote:
I imported a set of repeaters and simplex stations into my BF-F8HP image
file from a .csv file, which went fine. However, the power setting for each entry defaulted to HIGH. I prefer to use MED, but was forced to individually change each entry, since there does not seem to be a way to "fill down" or otherwise globally change that category. Is there in fact a way to do that? If there was a way to export that setting into a spreadsheet program it could be done there, but that doesn't seem to be the case.
Thanks for your help.
1 Highlight all of the rows that you want to change to a common group of settings. 2 Click the [Properties] button at the top of the spreadsheet style editor (alternatively right-click a highlighted row and choose "Properties" in the list that appears) to bring up the Memory Properties editor. 3. Tick the box to the left of the "Power" setting to enable editing. 4. Change to the desired power level. 5. Click the [OK] button.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Bob DeFranco at bob.defranco@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com