Yes its true many repeaters require the off set. I knew that, so that clears up those 2 columns freq and off set. Now how about the others what do they do? If a radio system does not use a setting I do not see a way to turn that setting off in Chirp.
On 5/13/2015 6:42 PM, jerry hodgson wrote:
to listen, you could just program the frequencies with no offset, to use it on the facility's system, you will need to know things like PL tones(some repeaters require a tone to open the repeater to reduce accidental outside interference), frequency offset(repeaters receive on one channel while transmitting on another, gotta have it) etc, but if all you are doing is listening, the repeater broadcast freq should(but may require more settings) be all you need. typically either the chief site safety man or engineering head will have those settings
On May 13, 2015 7:07 PM, "David" <weather@lightingunlimited.com mailto:weather@lightingunlimited.com> wrote:
Hello, I downloaded and installed the software. I am able to access the radio but I need help with all the column headings. What is Tone mode, TSQL, DTCS, none and cross? Tone ToneSqu DTCS Code DTCS RX Code DTCS Pol MN, RR, RN, NR Cross Mode, tone->Tone, Tone->DTCS, DTCS->Tone, ->Tone, DTCS->, DTCS->DTCS Duplex none, -, +, split, off Offset Mode FM, NFM Skip If I just want to listen to a channel and not talk on it want should the above setting be set to? If I want to use it for my RR job what do I set the above too? I know the frequencys. What is type "BM" and mode "FMN" on radio reference mean? Thanks for your help. David _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com>
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com