Hi Michael,

Your issue is most likely a driver issue of your programming cord. You will likely need to down grade to the prolific 3.2.0.0 driver. This should take care if the issue.. Below is the link to the miklor site that has detailed instructions with driver download link. Let me know how it goes..

BTW.. I grew up in Le Claire so Hi from a fellow QC'er! 

http://www.miklor.com/COM/UV_Drivers.php#install

Todd Bloomingdale​-KC9LOX​

Tomah, WI


On Sat, May 14, 2016 at 1:06 AM, Michael Scheel <mws1972@gmail.com> wrote:

I get a "unable to probe radio band" error.

=============================
Michael W. Scheel
Davenport, Iowa

K0QCS - KCQ0QCS
ARRL - www.arrl.org
Davenport (IA) ARC
Muscatine (IA) ARC
RCMA IA-011
Quad-Cities Scale Modelling Society
DAGOBAH
USMC Corporal (2531) 1972-1976
=============================


_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to tbloomingdale@gmail.com at tbloomingdale@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com