I have three radios. I used chirp to download an image of the first radio, made a few changes just to practice the process (added some NOAA frequencies), saved that file and uploaded it to radio 1. Changes uploaded fine.

I thot’ I could use that same fine to upload to the other radios so they would all be set up the same?

I downloaded the image of the second radio and saved it, then tried to upload the changed file from the first radio to the second but got this error:

An error has occurred. Image not supported by radio: 'XXXXXXX' where each X is actually a rectangular box with an upper case X inside.

I saw where someone else had this error and it was noted that the firmware was not the same for the two radios so I checked it and the firmware displayed in the Firmware Message 1 for both downloads is identical: N5R340A

So I’m not sure where to go from here. I guess I can recreate all the changes in the download from the second radio (?) but kind of wanted to know what I am doing wrong so the upload of the image from the first radio is not being supported by the second?

Thanks for your help!

debra