On Mon, May 27, 2013 at 5:43 PM, Dan Smith dsmith@danplanet.com wrote:
is there anywhere that gives the meaning of the columns in chirp?
CHIRP, like any other programming software, assumes the user knows what he wants to put into his radio. It's rather dangerous for you to be transmitting on amateur or commercial frequencies without knowing the details of what you have told your transceiver to do. That said, I just cooked up a description of these fields:
http://chirp.danplanet.com/projects/chirp/wiki/MemoryEditorColumns
It won't teach you what to put in the columns. For that, you probably want an elmer or some other educational reference material. However, in support of understanding exactly how CHIRP interprets each, that guide should help.
-- Dan Smith www.danplanet.com KK7DS
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
Very nice.
After reading through it quickly, I would suggest these few changes/corrections.
- Although it is discussed in the Cross Mode section, the DTCS Rx Code column has been left out. - The first "None" in the Duplex section should be "(None)" - Also, "RX DTCS Code" in the Cross Mode section (two times), should be "DTCS Rx Code"
Jim KC9HI