3 Jun
2020
3 Jun
'20
8:27 a.m.
You automatically get a virtual com port when you plug in your USB/serial adaptor. It should come up as /dev/ttyUSB0 /dev/ttyUSB1 etc. Not sure how you get the com1: designator but Chirp doesn't need that.
On 03 June 2020 at 11:11 Glenn K0LNY glennervin@cableone.net wrote:
How does one go about doing virtual com ports in Linux? In windows, I have a lot of them. But I can really only use Chirp in Linux, as it is doable in windows, but difficult in Windows when it is working right, because of the fact that Chirp in Windows does not work well with a screenreader, I would not want to try and figure this out in Windows. I mainly use windows, and only boot to Linux for things like using Chirp, or working with disk partitions and the like. But since Chirp worked as normal in Linux with the new cable and my Baofeng, I know that the cable is working and Chirp is working. This cable has a plug in that resembles a headphone plug and a variety of different cords for different radios. One of the ones that worked for the Baofeng has two tips as the Baofeng cable does, but there is only one other cable with two tips and that fits neither radio. The other tips only have one plug a couple of which are too small to fit in the bigger jack. I guess I didn't try the smaller tips in the smaller of the Kenwood jack. Maybe the smaller plug on the radio is the important one? The cables aren't labeled, so I had to try them and see if they work. Has anyone here used a cable for a Kenwood TH-F6 with only one plug? Glenn Glenn ----- Original Message ----- From: Jardy Dawson via chirp_users mailto:chirp_users@intrepid.danplanet.com To: Discussion of CHIRP mailto:chirp_users@intrepid.danplanet.com Sent: Wednesday, June 03, 2020 1:41 AM Subject: Re: [chirp_users] Fw: No USB Port Error A lot of Kenwood need to have “virtual comm ports” installed. You might want to check the Kenwood web site to see if that is the case here. Jardy Dawson WA7JRD Message sent through sub space hailing frequencies using the Universal Translator. > > On Jun 2, 2020, at 23:38, Glenn K0LNY < glennervin@cableone.net mailto:glennervin@cableone.net > wrote:>> > Well this cable was advertised to work with Kenwood, but it doesn't.I tried one of the supplied cables and it worked okay with my Baofeng. And then again none of the cables worked on the Kenwood. Looks like I need to get another cable, and Chirp isn't the problem. ----- Original Message ----- From: D.J.J. Ring, Jr. mailto:n1ea@arrl.net To: Discussion of CHIRP mailto:chirp_users@intrepid.danplanet.com Sent: Tuesday, June 02, 2020 11:56 PM Subject: Re: [chirp_users] Fw: No USB Port Error Glen, With the USB device plugged in, use a terminal and enter this: lsusb Carefully check the names of the devices. Is it really /dev/USB1 ? Remember Unix / Linux is case sensitive, /dev/USB1 is NOT /dev/usb1 which is a normal device name. Let's assume you made an error and the device is ttyUSB1. In terminal: ls -l /dev/ttyUSB1 Pay attention to the group this device belongs, to. The owner will be root. You need to be in the same group to access it. Find out what groups your user account is in by the command "groups." In terminal enter: groups Is the group that ttyUSB1 belongs to listed as one of your groups? If not you have to add your user to that group using the root account. Best wishes, David N1EA On Wed, Jun 3, 2020, 00:10 Glenn K0LNY < glennervin@cableone.net mailto:glennervin@cableone.net > wrote: > > > Well, I made a little progress with the USB problem, in Ubuntu.I installed a new live Ubuntu, on a thumb drive for a friend, and I installed Chirp for him, and plugged in my Kenwood and tried to download from radio, and first it did nothing. So I tried again, and I got the same error: error no 2 cannot find ttyUSB0 No such file or directory. And this was on a fresh install of Ubuntu 16.43 with updates installed. Just like on my other computer that had the same issue. So in doing a web search on the problem, I found a YouTube where the guy suggested using lsusb and he found the device in his case, on USB1. So I went to terminal and found the prolific on USB1 So then I found that in Chirp, it wasn't there before, I am fairly sure. So now I no longer get that error, but it still does not download from the radio, it just goes to the blank Chirp screen. Any ideas? Thanks in advance. Glenn ----- Original Message ----- From: "Glenn K0LNY" < glennervin@cableone.net mailto:glennervin@cableone.net > To: "Discussion of CHIRP" < chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com > Sent: Friday, May 22, 2020 5:03 PM Subject: Re: [chirp_users] No USB Port Error Jim, I just checked to add ubuntu-mate to the dialout and it tells me that ubuntu-mate is already a member of dialout. So there is a problem with it finding usb0. Could it be that a different radio's cable might be using a serial assignment? I've used the Tytera cable via USB and Baofeng's cable via USB and it has always been recognized. Note, the cable I'm stuck with for now is a USB cable that should go with a digital radio, the Radioddity GD77-S, so I don't know if it has something different to the cable. I accidentally sent the Baofeng cable along with the GD77-S that I traded for the Kenwood. Glenn ----- Original Message ----- From: "Jim Unroe" < rock.unroe@gmail.com mailto:rock.unroe@gmail.com > To: "Discussion of CHIRP" < chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com > Sent: Friday, May 22, 2020 12:51 PM Subject: Re: [chirp_users] No USB Port Error On Fri, May 22, 2020 at 1:06 PM Glenn K0LNY < glennervin@cableone.net mailto:glennervin@cableone.net > wrote: > > Hi, > I just got a new used radio, a Kenwood TH-F6. > So I plugged in the radio using a non-Kenwood cable and I went into > "radio" and download from radio and selected my radio model and USB0 and I > get the message: > error no 2 cannot open tty/usb0 error cannot locate tty/USB0. > or something similar. > I have used this cable and that Ubuntu with Chirp in the past for my other > radios, and other than different brands of radios, I have always been able > to do this. > I know a guy who has done this to this model using the Baofeng cable using > a different software in Windows, not the Kenwood software, but one that > they purchased. > I don't recall the name, but I think it starts with an R. > At any rate, I'd sooner buy a Kenwood cable than that other software and > keep using Chirp. > Hopefully I didn't get it mixed up with the Radioddity cable. > I thought I had the right cable with the Radioddity when I sent it off. > I don't know if they put the name of the associated radio on the cables, > since I'm Blind. > But any who, would this be an error for the wrong cable? > Thanks. > Glenn Hi Glenn, >From what you are describing it sounds like you Linux user doen't have permission to access the port. Either run CHIRP as root or as your Linus user to the dialout group. I also have a Kenwood TH-F6a. CHIRP programs it in "live" mode. Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Glenn at glennervin@cableone.net mailto:glennervin@cableone.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net mailto:n1ea@arrl.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com > >--------------------------------------------- _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Glenn at glennervin@cableone.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com >--------------------------------------------- _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Glenn at glennervin@cableone.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1 937 825 5032 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net