i did try that but made no diference.


i play a bit more today, now i programs 30 memorys with its own programmer, i read in chirp and memorys read randomly into random locations on each download.


i now fine i think mine is a newer varient? a 898st. not sure what the 't' gives me, but that could be a prob.


i think the radio is odd. in operation, the 199 memorys are NOT shared between a or b. each has its own set of 99.

it seels a poor radio compaired to the likes of the other cheapos as the baofengs that i have found very good like the big 3 i/k/y lot.



From: chirp_users-bounces@intrepid.danplanet.com <chirp_users-bounces@intrepid.danplanet.com> on behalf of Jim Unroe <rock.unroe@gmail.com>
Sent: 13 March 2017 21:22
To: Discussion of CHIRP
Subject: Re: [chirp_users] purchase of a leixon vv-898s - memories
 
On Mon, Mar 13, 2017 at 3:10 PM, Neil B <ne.b@hotmail.co.uk> wrote:
> i did yes. but with a lot of playing, it just had empy mem slots.
>
>
> i am programming it with the silly software it came with but even when thats
> written ok to radio and used, when read ok in chirp, no mems.
>

I don't remember what the difference is between the S and E models,
but I think it changes the way the channels are stored in the radio.
Have you tried reading the radio with the VV-898E to see if the
channels are retrieved?

Jim
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
intrepid.danplanet.com
This list is for discussion of CHIRP use, issues, and beta releases. At any point, the latest daily build will be available here: http://trac.chirp.danplanet.com ...

This message was sent to m1cfk at ne.b@hotmail.co.uk
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com