Jim, thanks for the suggestion, I tried with those images, I have the original image before it broke down, (I ran out of power) I also have the image from the factory ....
The problem is that Firmware Messages 1 and 2 is empty.
It does not accept ANY image because there is a blank image on the radio.
Anything I upload says it is not compatible with the current image... even the original backup
The only solution is to forcefully load the original image.
And I can only do this with the requested version 20140714.
I tried with 0.4.1 and older versions, but older versions of Chrip does not communicate with the radio...
Emil
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com On Behalf Of Jim Unroe Sent: Monday, November 9, 2020 7:25 PM To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] chirp-daily-20140714-win32
On Mon, Nov 9, 2020 at 12:46 PM emilmesesan@gmail.com wrote:
Hi Tony, no problem, thanks for the quick reply. :)
I need this exactly old version because i have bricked a Baofeng UV82, and I need to restore an img file “bypassing” the verification of version...
You don't really need that old version. You just need to upload an image that was from a radio with the exact same "real" firmware version. But I just put the file you are looking for at the link below.
http://kc9hi.dyndns.org/uv5r/programming/CHIRPrecovery/
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Emil at emilmesesan@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com