Is this the correct one?
-= Gary =-
On Tue, Jun 11, 2024 at 16:09 Dan Smith dsmith@danplanet.com wrote:
Gary, you emailed the "list owner" address and not the list itself ( users@lists.chirpmyradio.com). Please re-send to the proper destination (or open a bug, which sounds more appropriate).
--Dan
On Jun 11, 2024, at 12:42 PM, Gary gary.barth@gmail.com wrote:
I have two ‘Fengs, a GT-5R and a BF-F9 V2+. I have programmed both
successfully several times, and decided to add another local repeater to both lists. I have included a screen shot of the last attempt on the BF-F9. I had just updated your software, and added the W3EPE repeater to the list (which correctly shows every entry), saved and uploaded it to the radio.
After disconnecting from Chirp, I attempted to access the repeater
(which is very close), and it failed. So I went into the radio menu, and went to item #25 Offset. It was set to 000.000. Supposed to be -5.0Mhz. So I manually set in on the keypad and exited. Tried the repeater again - no joy. Checked the offset - 000.000. Decided to try the offset itself - 444.375. No repeater, offset reset to 0.
Checked several other freqs on the list - list says there is one, radio
shows 0. Uh-oh! Grabbed my GT-5R, and downloaded it to Chirp. Then disconnected and tried several repeaters. All worked. Used the radio menu, and the offsets were there. So I added the new repeater to that list and uploaded the list to the radio. Now none of the repeaters work, and manually checking the radio, all offsets have been reset to 0. They’re correct on the Chirp list, but the radio (neither radio) doesn’t receive the offset data, for some reason. AND - I can no longer manually set the offset from the radio keyboard. As soon as I exit the menu the offset returns to 0. Both radios are now like this. I reset the BF-F9 twice and tried reprogramming it, with no success.
Any idea what’s happening here? Chirp was working until the last update,
and now I can’t even manually set these offsets…
TIA,<IMG_0067.jpg>
-= Gary =-