My review of the chirpmyradio homepage leads me to think the answer is to use: UV-5R++ (use UV-5R) But you say you've tried that.
Are you able to read from the radio? That's the first step, I believe.
I don't have that radio, so I can't offer any specific advice, aside from the typical:
Turn up the volume, Put the radio on a quiet channel, Remove the antenna, And make sure the K connector is FIRMLY in the radio - if this is a new-to-you radio you may have to push a little harder to make sure the connector is firmly in...
Hope this helps,
Ken, N2VIP
On Apr 21, 2025, at 23:18, sentinelwolf70--- via Users users@lists.chirpmyradio.com wrote:
If this has been discussed before, I apologize for adding to the discussion. I have a UV-5R+Plus that isn't accepting my image when I upload it (cloned) to the radio. I've been successful with my old UV5R and new AR-5RM. I don't see the UV-5R+Plus in the radio drop-down. I've attempted the UV-5R, UV-5RH, UV-5X, and UV-5XP without success. Can anyone point me in the correct direction? Thank you so much for your assistance.
Shawn _______________________________________________ Users mailing list users@lists.chirpmyradio.com https://lists.chirpmyradio.com/postorius/lists/users.lists.chirpmyradio.com To unsubscribe, send an email to users-leave@lists.chirpmyradio.com To report this email as off-topic, please email users-owner@lists.chirpmyradio.com List archives: https://lists.chirpmyradio.com/hyperkitty/list/users@lists.chirpmyradio.com/