On Wed, Oct 14, 2015 at 11:22 AM, Eric Evans km4jvv@gmail.com wrote:
I've never used CHIRP and I am very confused. I just purchased a JT270M and can read from radio to CHIRP, but not write CHIRP to the radio. Jetstream advised me that CHIRP and the 270M will not work with WIN 10. I will not get into the quality of support from them in this section.
I do have a machine with WIN7 on it and I get the same issue. I did get the VV898 software to load the 270 M ( 1 test freq)but with errors (No ALPHA Tag). Jetstream suggested a different prolific driver, but as of yet, nothing has been offered to me from them to use. I am fair with computers, and I wish to determine the following:
Which OS to use
Which driver do I use for the prolific driver (USB w/chipset)
Any other suggestions that you may have.
Thank you!
-- EJ Evans KM4JVV
Generally if you are running any version of windows from Vista and up any you have a programming cable with a Prolific type chip, you must download, install and select the older Prolific v3.2.0.0 driver.
http://www.miklor.com/COM/UV_Drivers.php
Jim KC9HI