On Wed, Jul 4, 2018 at 9:48 AM, survivor@cryptolab.net wrote:
When I use Chirp to set radio channels, there are many columns I cannot let empty, unless I cannot save it or uploat to radio. Most repeaters here have no subtone and I cannot let tone column empty, or null or zero. In chirp, there is a preseted tone list from 67.0 to 254.1. When I power on the transceiver in frequency mode and ajust to repeater channel, I can hear people talking normally. When I power on in channel mode and choose the respective channel with the same frequency, I cannot hear people talking. Pearhaps, tone values are wrong and in most cases they are unnecessary. How to I solve this? I have a Baofeng UV-82 WITH 8 Watts (HP). Firmware 3 KEY: N822413 6 KEY: 140902N
TKS
PU4YOU
Setting Tone Mode to "(None)" is the same has having menu 10 (R-DCS), 11 (R-CTCS), 12 (T-DCS) and 13 (T-CTCS) set to OFF. If the Tone, ToneSql, DTCS Code, DTCS Rx Code DTCS Pol and Cross Mode columns don't show up as blank, then click "View" in the menu bar and enable "Hide unused fields" (which is the default on new CHIRP installations). Even when this setting is not enabled, the values in these columns are ignored.
The values in the columns mentioned above a only recognized when they are enabled by the selected Tone Mode. And then only the columns required by that mode are paid attention to. For example...
Tone Mode: Columns (None): Tone: Tone TSQL: ToneSql DTCS: DTCS Code, DTCS Pol
For more details review either of the "columns" guides linked here: http://www.miklor.com/COM/UV_CHIRP.php#guides
Jim KC9HI