Well, good and bad news. I have the CH340 USB Type cable and If I pull the plug on the cable I get the exact message as if I was trying to download with the radio on and plugged in. I have a disk from badfeng it came with the cable and the diver is recognized by windows 10 but does not work. We’re do I find the old driver to install?
Gary A Cox Sent from my iPhone
On Jul 24, 2020, at 11:59 AM, Jim Unroe rock.unroe@gmail.com wrote:
On Fri, Jul 24, 2020 at 2:46 PM Gary A. Cox garyacox@sbcglobal.net wrote:
No, it’s a new baufang factory cable. But that doesn’t mean any thing. I tried a generic cable and it gave a no response error.
Gary A Cox Sent from my iPhone
I'll be if you don't even attach the programming cable to the radio you get the same error. It is a programming cable problem and once you get it solved, the UV-82III selection will work.
Are you running Windows? If it has a Prolific type USB-to-Serial chip, have you downloaded, installed and selected the older v3.2.0.0 device driver? If it is a WCH CH340/CH341 chip, have you downloaded and installed the WCH driver?
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Gary at garyacox@sbcglobal.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com