Hi Jim KC9HI
Thanks so much for your help.
I loaded test module 11046 and I ran an initial test with my 5RX radio. So far so good. I could enter airband frequencies and upload them to the radio. What does not work is entering frequencies from the FM radio band (65-108 MHz). This results in an "Invalid Entry" error message. I have attached a debug report.
Thanks again, Roland
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Jim Unroe Sent: Monday, January 15, 2024 2:12 PM To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] Entering airband frequencies
On Mon, Jan 15, 2024 at 4:55 PM Roland Welte roland.welte@bluewin.ch wrote:
Dear Chirp Community,
I am using Chirp Next with a BAOFENG 5RX radio. Since this particular radio is not among the supported devices I select radio BAOFENG UV-5R, which generally works fine. However, the 5RX radio covers airband frequencies (108-136 MHz) which the UV-5R does not, so Chirp won’t let me enter airband frequencies (although downloading these frequencies from the radio works fine). Is there a trick to circumvent Chirp’s validity checks when entering frequencies?
Your help with this is very much appreciated,
Roland
The UV-5R support is limited to the bands that the radio supports. But there is currently development going on for this model and a test driver module available for testing and feedback. Searching the CHIRP Activity page with '5rx' will currently bring up the active issue (#11046) at the top of the list. I have provided a direct link to the ticket below.
https://chirp.danplanet.com/issues/11046
The current vendor/device selections are currently Baofeng / UV-5RX but I have plans to change that to '5RX' with the next test build or submission.
Please test the driver module and provide feedback.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Roland at roland.welte@bluewin.ch To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com