Lots of things are not included I guess the new radios the intent is to get channel mapping working first to make programming a bit easier. But you should be able to set your deviation to half or narrow by copying the channels into VFO changing it there then writing it back to the same memory spot. That doesn't take much time unless you have maybe a hundred or so channels to change to narrow. Then I would look for software that does have that set menu item. Not sure if there is a VX-7 Commander I know it supports my VX-5.
Sent from my 15.4" MacBook Pro, i7 quad core
On Jan 30, 2013, at 12:03 PM, John Randle john.randle@tds.net wrote:
I have used CHIRP to download my VX-7R's configuration (previously created with VX-7 Commander) and noted that some of the radio-wide features were not displayed .. only the contents of the specific memory channels. Is there any plan to address additional configuration items as is done for the UV-5R? I also did not see a FMN or half deviation setting.
John 73's de K9RSQ _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users