Hi All, Anyone here have any idea on why after installing Chirp on the Raspberrypi that I lost use of keyboard input? The page suggests a command to ensure Chirp has access to the USB cable, and I wonder if that would cause it to not allow any other USB device. When I doover SSH: lsusb the keyboard shows up. The snap command was something like: sudo snap connect chirp-snap:raw-usb
Thanks for any assistence.
Glenn ----- Original Message ----- From: "Jim Unroe" rock.unroe@gmail.com To: "Discussion of CHIRP" chirp_users@intrepid.danplanet.com Sent: Tuesday, July 26, 2022 6:58 AM Subject: Re: [chirp_users] RaspberryPI
On Mon, Jul 25, 2022 at 11:40 PM K0LNY_Glenn glenn@ervin.email wrote:
Hi, Can Chirp be installed on a RaspberryPI, and if so, is there a script available for installing the dependencies? Thanks.
Glenn
Hi Glenn,
Yes. I have attached my notes that I used for installing the CHIRP Snap application on my Raspberry Pi model 3B. These notes were derived from the information on this page: https://snapcraft.io/install/chirp-snap/raspbian
I just updated my RPi 3 to have the new build released today: CHIRP daily-20220726.
Jim KC9HI
--------------------------------------------------------------------------------
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com