The step is the channel spacing amount.  You can set this on many radios from 25 to 2.5 MHz.  When you turn a tuning know in VFO mode, this is the amount the radio changes frequency by. 

 

If the radio’s step is too high, it will not allow entry of some frequencies and will do something (variable by radio) to go to the next higher or lower frequency which complies with the step value you have set.

 

Mike

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users