John,
This is the correct forum for issues installing/running CHIRP or for issues programming specific radios.
Is the issue that CHIRP won't run on your computer, or that CHIRP runs, but fails to work with this specific radio?
And just got clarity sake, you are attempting to program the Baofeng BF-F8HP, a radio with 3 power levels.
Ken, N2VIP
On Aug 27, 2021, at 10:28, JOHN E BECK Sr kd2wgn@gmail.com wrote:
I don’t know if this is the proper forum to raise an issue regarding CHIRP on MacBook Pro (Mac OS 11.5.2 Big Sur) but I need help in getting CHIRP to work with regard to interfacing uploads/downloads to my F8-HP HT. If it is not, please provide me with a means by which I can state my problem in detail and track a resolution.
Thank you.
KD2WGN
On Aug 26, 2021, at 7:07 PM, Eric Chopin echopin27@gmail.com wrote:
Yaesu FT270 H/H
Greetings, so far I have used CHIRP with 100% success in programming many radios. What I REALLY need is being able to program the YAESU FT270 Hand Held. When is one of you brilliant guys going to update CHIRP with this radio?
Thanks VE7ECJ
On Sun, Aug 22, 2021 at 12:01 PM chirp_users-request@intrepid.danplanet.com wrote: Send chirp_users mailing list submissions to chirp_users@intrepid.danplanet.com
To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request@intrepid.danplanet.com
You can reach the person managing the list at chirp_users-owner@intrepid.danplanet.com
When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..."
Today's Topics:
- Re: UV5X Programming issue (White Ranger)
Message: 1 Date: Sat, 21 Aug 2021 14:33:09 -0500 From: White Ranger cortchubby20007@gmail.com Subject: Re: [chirp_users] UV5X Programming issue To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Message-ID: CAP+N95FGwe=VRT21Yd+EiDSjhknL0j_xGhMZqD7PEJXniiT93Q@mail.gmail.com Content-Type: text/plain; charset="utf-8"
Radio should be ON when up or downloading. Remove the driver and cable program, reboot PC reload driver SHOULD correct issue. If using aftermarket cable check to see contacts are CLEAN (*shiny) and fit TIGHTLY into the mike provisioning adapter (Mic jack) DO NOT touch ANY buttons while programming. Worst case, prior to programming RESET the radio to factory resets then load your amended program.
On Thu, Aug 19, 2021 at 2:03 PM Jim Unroe rock.unroe@gmail.com wrote:
Hi Eric,
On Thu, Aug 19, 2021 at 12:47 PM Eric Chopin echopin27@gmail.com wrote:
UV5XP.... However to get CHIRP to see the radio either in the 'Download from
radio'
or 'Upload to radio' ... with the cable plugged in to my PC or myMAC, the
radio must me switched OFF...then as I select 'Download or upload'as I
select 'OK' i must immediately switch ON my radio then CHIRP sees itand
proceeds. If I try to 'Download or upload' with the radio alreadyswitched
on I get the message 'The radio did not respond' as CHIRP cannot seeit
connected. Any suggestions? Thanks VE7ECJThat sounds like a programming cable/driver issue. Also, to program that radio you must choose...
Vendor: Radioddity Model: UV-5G
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to cortchubby20007@gmail.com at cortchubby20007@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com