Hi Bill, For the fun of it, try this and report back. Jim KC9HI
On Fri, Jun 5, 2015 at 9:52 PM, Bill Kasper williamkasper@frontiernet.net wrote:
Hi Jim et al,
Thanks for the info, I sent more info, In the meantime, if someone has a known good HN5RV01 image could you please send it to me --
tnx es 73 de Bill WB2SXY
--
On 6/5/2015 6:22 PM, Jim Unroe wrote:
On Fri, Jun 5, 2015 at 5:51 PM, Bill Kasper williamkasper@frontiernet.net wrote:
Hi list,
Just finished programming a batch of UV5R N5R2045 and -1 -7 All working fine.
I assume that you mean N5R2401, N5R2405 and N5R2407.
Using Chirp Daily 20150513: download UV5R radio image deleted existing frequencies imported same freq list used on above batch no errors at all reported all seemed OK with import and upload
OK
Unit transmits ok, RX indicator blue background lite works ok, when there is carrier or when hitting the monitor switch, just no audio. Tried set of headphones in rec jack -- still no audio.
You said all working fine above. "Unit"? Which unit? All of them? I'm confused?
Tried the same with Daily 20150530, no errors, no change.
did keyboard reset, no errors, no change.
Any possible setting that could cause this, or DOA audio output?
tnx es 73 de Bill WB2SXY
I has someone send me a "factory" image from a radio with N5R firmware within the last couple of days that appeared to have been cross-loaded with BFB firmware at the factory. That would cause a radio not to receive.
How about attaching your original downloaded image files?
Jim KC9HI _______________________________________________
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com