I like the fact that the other settings
aren't changed, just the frequency list and things that are
related to it. I've gone to club meetings and programmed new
radios (and old ones that the owner never had time to set up) for
other members. Many of the settings are personal, and changing
them means that the owner has to go in and reset all the settings
that are specific to the user such as mic sensitivity, display
settings, auto time off, and many others. It all depends on the
radio.
Randy (KE5EOT)
ARRL, QCWA, ARES, RACES
http://ke5eot.webs.com
On 01/30/2013 01:46 PM, Phaeton wrote:
Lots of things are not included I guess the new radios
the intent is to get channel mapping working first to
make programming a bit easier. But you should
be able to set your deviation to half or narrow by
copying the channels into VFO changing it there then
writing it back to the same memory spot. That doesn't
take much time unless you have maybe a hundred or
so channels to change to narrow. Then I would look
for software that does have that set menu item. Not
sure if there is a VX-7 Commander I know it supports
my VX-5.
Sent from my 15.4" MacBook
Pro, i7 quad core
I have used CHIRP to download my VX-7R's
configuration (previously
created with VX-7 Commander) and noted that some of the
radio-wide
features were not displayed .. only the contents of the
specific memory
channels. Is there any plan to address additional
configuration items
as is done for the UV-5R? I also did not see a FMN or half
deviation
setting.
-
John
73's de K9RSQ
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users