Do you have CTCSS tones set on the receive side.If so, remove them.It’s possible the repeaters aren’t sending a tone back to you..Stay Safe and Stay Healthy John MiklorOn Jun 6, 2022, at 10:01 AM, Al Jones <al@aljones.us> wrote:Attached is the image of my 'working' radio - problem is, it's not working right. This an older Baofeng UV-82L much prior to the recent FCC rule changes. I am both a licensed ham (KG5HEJ) and GMRS (WQYM836) operator. Though I recognize the legalities of using this radio, it's use in the GMRS bands is primarily for monitoring local tourists and providing them with help.That all out of the way. RX/TX on any of the ham bands is without problem, I can talk with anyone on our local repeater system, or simplex, without a problem (barring mountains which are occasional problems) on the GMRS freqs, I'm seeing (on my BCT15X scanner) a carrier being transmitted in the appropriate freq but hearing no voice on the carrier on both the one GMRS repeater channel and simplex. I and a friend have been all over these settings and I hope we're just missing the obvious (obvious to someone else.)Anyone ???//al KG5HEJ