I would say it's in progress, but I just haven't worked on it in a while. Fixing this driver for the 1.07+ firmware is on my summer todo list. Watch that issue for updates and beta modules to test.
--
Brian AF7MD
Question:
When programming my Lexien VV-898 with chirp, the alpha-numeric memory channel names get assigned to the wrong channels, always three channels off, channels 1,2 and 3 are assigned a generic name of A001, A002, A003 or B001, B002, B003 depending on which memory bank is selected. Although, the Ch 1 programmed name is assigned to channel 4, the channel 4 freq, offset, tones are correct. The radio uses the Jetstream jt270 software. Both banks share the same symptoms. Is there something simple I'm missing or a work around???
Gary Chambers KG5TQE
Sent from my iPhone
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Brian Dickman at brian.maybe@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com