I have a Baofeng DR1801
Using Chirp on Windows I can read/write to the radio
Using Kubuntu 22.10, running: python3
-mchirp.wxui I get an error message:
WARNING: Unable
to select ''
ERROR: uv5r._ident_radio: Radio did not respond
ERROR: uv5r._ident_radio: Radio did not respond
ERROR: Failed to clone: Radio did not respond
Traceback (most recent call last):
File
"/home/john/.local/lib/python3.10/site-packages/chirp/wxui/clone.py",
line 66, in run
self._fn()
File
"/home/john/.local/lib/python3.10/site-packages/chirp/drivers/uv5r.py",
line 845, in sync_in
self._mmap = _do_download(self)
File
"/home/john/.local/lib/python3.10/site-packages/chirp/drivers/uv5r.py",
line 554, in _do_download
data = _ident_radio(radio)
File
"/home/john/.local/lib/python3.10/site-packages/chirp/drivers/uv5r.py",
line 549, in _ident_radio
raise error
File
"/home/john/.local/lib/python3.10/site-packages/chirp/drivers/uv5r.py",
line 526, in _ident_radio
data = _do_ident(radio, magic)
File
"/home/john/.local/lib/python3.10/site-packages/chirp/drivers/uv5r.py",
line 421, in _do_ident
raise errors.RadioError("Radio did not respond")
dmesg confirms the cable is connected to ttyUSB0.
Is this a permissions problem?
I have tried: $ sudo usermod
-a -G $(stat -c %G /dev/ttyUSB0) $USER
What else can I do?
--
signature-mini
Kia ora
JohnG
_______________________________________________
using
LINUX :: the free open source operating system