Ah, thank you for the explanation.
The important point I hadn't realised is that if you don't select "Cross" in the first tone column, then it's safe to ignore the value of the "Cross tone" field. :)
Cheers, Toby
On 11 May 2012 22:13, IZ3GME Marco iz3gme.marco@gmail.com wrote:
Hi well ... cross tone is a little complicated and strongly depends on the radio as every model support it in a different fashion. BTW I'm working on a patch for FT857 driver cross tone support as I mixed up things when I wrote it.
A source of information on how tones and cross tones works in chirp is http://chirp.danplanet.com/projects/chirp/wiki/DevelopersToneModes keep in mind it has been written with developers as target audience but I think it can help.
In a few words cross tone are all tone combination that mix together ctcs and dtcs or use different tone codes for tx and rx.
73 de IZ3GME Marco
On 11/05/2012 09:05, Toby Wintermute wrote:
Hi, I couldn't find documentation explaining how the "Cross tone" option works. I'm guessing it's to set TX CT and RX DCS, or TX CT and RX none, or other combinations, but I wasn't sure which way around it all goes.
Could you point me to the info?
Thanks, Toby
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users