On Wed, Mar 17, 2021 at 2:28 PM Mike Allred <mike@mallred.com> wrote:
>
> Hello,
>
> New member/user, so apologies if I'm missing something mundane...
>
> I am trying to program a Kenwood TK-760H with Chirp. I am using a Prolific USB to 6pin cable that is supposedly designed for this radio (and similar).
>
> When I try to download from the radio it appears to partially work. The display on the radio changes to "- PC -" and shows the PC connection icon in the top left.
>
> However, after a few seconds I get the error message "Radio refuse to enter into program mode after a few tries".
>
> Of course, I never get the configuration from the radio.
>
> Ideas?
>
>
> Thanks,
> Mike

Hi Mike,

According to the Supported Radio Models list on the CHIRP home page,
CHIRP supports Kenwood TK-760 and TK-760G models. There is no mention
of supporting a TK-760H model. I would suspect that CHIRP is unaware
about that particular model's requirements for initiating the cloning
process.

Jim KC9HI
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Mike at mike@mallred.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com