Hi Dean, Make sure that the cable is really tight in the radio. And, open device manager and see what port is in use, and make sure the same port is selected in Chirp. That is where I would start. HTH. Glenn ----- Original Message ----- From: D Bunk To: chirp_users@intrepid.danplanet.com Sent: Monday, December 19, 2022 5:56 PM Subject: [chirp_users] Error comport
I have a brand new baofeng UV-82 but can not get the program to recognize it. I keep getting an error message “can not open port”. I have downloaded the lasted version of the program. Any ideas? Using windows 10 on pc.
/r Dean
/r Dean
--------------------------------------------------------------------------------
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com