Just hold SHIFT when you select the cells to select the whole range, then right-click to bring up the menu and COPY.
On Wed, Nov 18, 2015 at 7:02 PM, Gary Runningbear <runningbear2000@gmail.com
wrote:
Can I copy the channels in Mass and how would I do that? On Nov 18, 2015 8:00 PM, "Gary Runningbear" runningbear2000@gmail.com wrote:
Thanks Jim, I'll try that here in just a little bit. On Nov 18, 2015 7:58 PM, "Jim Unroe" rock.unroe@gmail.com wrote:
On Wed, Nov 18, 2015 at 7:42 PM, Gary Runningbear runningbear2000@gmail.com wrote:
I just received my second uv-82 L today and in the process of trying
to copy
the image of the first radio into the new radio resulted in a error
message
stating that the software version of the image did not match the
software
version of the radio and would not load the image. Is there a way to
bypass
this is I am NOT looking forward to handloading 56 channels worth of information into the new radio by hand.
You download from radio #2 into CHIRP (or load a previously saved image from it) Click File -> Import and then change the file mask from [CHIRP Files (*.chirp)[ to [CHIRP Radio Images (*.img)] Locate and loat the saved image from radio #1. Make any needed changes in the Import From File menu and then click the [OK] button.
If that is too much, then just download from both radios to create 2 tabs. Then copy-and-past the channels from the tab from radio #1 to the tab from radio #2.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com