Do you have the radio set for simplex operation?
Randy VE3JPU@me.com
On Jun 8, 2016, at 9:26 AM, Jeffrey fongemie@gmail.com wrote:
Hey everyone,
I'm pretty new to radios in general, and more so programming them, but I'll do my best to get the terminology right.
I'm trying to use CHIRP to program a UV-5R so that it can communicate with a Motorola radio on a certain frequency. The Motorola is set to use 151.9400 with a PL tone of 67.0 for both send and receive.
PL is the same as CTCSS correct?
On the UV-5R, I've got Tone Mode set as TSQL and ToneSql set to 67.0 - and it does not work? The two radios are not communicating. Am I missing something? Something special about Motorola PL tones? Should be a standard right?
Thanks for any advice.
Jeff
-- ______________
Jeffrey Fongemie
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Skid at ve3jpu@me.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com