I am having the same problem as Ray, but also with my TH 9800. The TYT software can't see the radio either. So I don't think it is the plug on the Baofeng cable in my case.
Thanks for any help...
73 --Rodger KK6OPW
On 11/5/2015 10:53 AM, Gary Runningbear wrote:
Hi Dave, I don't believe there will be a need to be concerned with the port number if the prolific 2303 driver is downloaded and installed. when I did that it immediately recognized the circuitry in the patch cord. On Nov 5, 2015 1:51 PM, "dmdfacp@gmail.com" dmdfacp@gmail.com wrote:
How about your serial port ? I just jumped in, so forgive me if I'm redundant. If you do not know which port is being used, unplug your USB-to-radio cable at the computer end. Re-plug it and watch for a small notice specifying the port to which the computer connected it. Verify that CHIRP is looking at the correct port. I just went through this, within the past half hour. Good luck. I'm a newbie, here, too. Dave
Sent from my iPhone DSP
On Nov 5, 2015, at 1:08 PM, Ray Nelson via chirp_users < chirp_users@intrepid.danplanet.com> wrote:
I've downloaded the software & installed. I keep getting error message the radio is not connected. What am I doing wrong?
Sent from my iPad _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Hi Dave, I don't believe there will be a need to be concerned with the port number if the prolific 2303 driver is downloaded and installed. when I did that it immediately recognized the circuitry in the patch cord.
On Nov 5, 2015 1:51 PM, "dmdfacp@gmail.com mailto:dmdfacp@gmail.com" <dmdfacp@gmail.com mailto:dmdfacp@gmail.com> wrote:
How about your serial port ? I just jumped in, so forgive me if I'm redundant. If you do not know which port is being used, unplug your USB-to-radio cable at the computer end. Re-plug it and watch for a small notice specifying the port to which the computer connected it. Verify that CHIRP is looking at the correct port. I just went through this, within the past half hour. Good luck. I'm a newbie, here, too. Dave Sent from my iPhone DSP On Nov 5, 2015, at 1:08 PM, Ray Nelson via chirp_users <chirp_users@intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com>> wrote: I've downloaded the software & installed. I keep getting error message the radio is not connected. What am I doing wrong? Sent from my iPad _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com> _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com>
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com