Are you just sending the file from the other radio to the new one? Could be a firmware difference.

Sent from MailDroid

-----Original Message-----
From: Ken Hansen <ken@n2vip.org>
To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com>
Sent: Thu, 14 Oct 2021 0:08
Subject: Re: [chirp_users] Uv5r’s went tx after chirp config

Just to clarify, you are 'cloning' by writing an 'image' or settings file to the radios from CHIRP, correct? I ask because sometimes people mean cloning from radio-to-radio using a specific cloning cable.

How much time has elapsed between radio purchases? What are the firmware levels of the radios? What is the range of frequencies you are using (ham, GMRS/FRS, other)? One of these answers may provide the answer.

Ken, N2VIP

> On Oct 13, 2021, at 20:58, brandon barry <cr4c987@gmail.com> wrote:
>
> I have 3 uv5r radios Ive configured the way I’d like them, and ordered 4 more to do the same. The original 3 are in perfect Working order. When ever I try to clone the new 4 they do nothing when I try to transmit . The channels all take after cloning but I can’t use the radio. Function restores after a factory reset. Radios were purchased from the same vendor, and my new cable was purchased from the same vendor as well . first one was flawless but misplaced. Any ideas?
>
> Sent from my iPhone
> _______________________________________________
> chirp_users mailing list
> chirp_users@intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Ken Hansen at ken@n2vip.org
> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to David Buss at kd9ebr@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com