Jardy - His cable is FTDI, not Prolific.
On Mon, Jul 23, 2018 at 11:33 PM, Jardy via chirp_users < chirp_users@intrepid.danplanet.com> wrote:
Install the driver, then go to Device Manager and roll the driver back to 3.2.0.0. Windows won’t roll it back on its own.
Jardy Dawson WA7JRD Message sent through sub space hailing frequencies using the Universal Translator.
On Jul 23, 2018, at 20:13, randy true w4rttrandy@outlook.com wrote:
Went to Miklor and got the driver and followed the instructions, but it never finds the driver.
Randy W4RTT
*From:* chirp_users-bounces@intrepid.danplanet.com < chirp_users-bounces@intrepid.danplanet.com> on behalf of Larry Howell < larry.howell.47@gmail.com> *Sent:* Sunday, July 22, 2018 11:03 PM *To:* Discussion of CHIRP *Subject:* Re: [chirp_users] ft897
When and why Microsoft chooses to do things is a great mystery. If Device Manager shows your cable to be a Prolific cable, try rolling your driver back to 3.2.0.0. Info found at www.miklor.com. Miklor Radio Information Site - Miklor http://www.miklor.com/ www.miklor.com outdoors hunting camping SHTF GMRS radio communications antenna battery electronics scanners digital computer software hardware laptop iPad iPhone eBay music radio
Larry AC8YE
On Sun, Jul 22, 2018 at 10:22 PM, randy true w4rttrandy@outlook.com wrote:
The OS is Win 7 with updates enabled, but I have been using Chirp for over a year with no hassles. What should the correct driver be?
Randy W4RTT
*From:* chirp_users-bounces@intrepid.danplanet.com < chirp_users-bounces@intrepid.danplanet.com> on behalf of Larry Howell < larry.howell.47@gmail.com> *Sent:* Sunday, July 22, 2018 7:01 PM *To:* Discussion of CHIRP *Subject:* Re: [chirp_users] ft897
Hi Randy,
You didn't say which OS your computer runs, so I''l assume it's Windows. If you have it set to install updates automatically, or the OS is Windows 10, then Microsoft has probably replaced the driver with a different one that doesn't like the cable. This typically occurs with cables that use the Prolific USB-serial chips. Many cheap cable use clone chips that newer drivers detect and will ignore because they aren't Prolific chips.
Larry AC8YE
On Sun, Jul 22, 2018 at 6:27 PM, randy true w4rttrandy@outlook.com wrote:
Chirp has suddenly stopped communicating with my 897.
I have checked all com port settings in the program/computer/and radio All are OK.
The 897 will still work with other programs on the same com port.
Rebooted, no jot.
Should I try and reset the radio?
Randy W4RTT
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to larry.howell.47@gmail.com at larry.howell.47@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrep id.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to larry.howell.47@gmail.com at larry.howell.47@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrep id.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Wuest at jhwuest@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com