On Tue, Feb 7, 2017 at 11:13 AM, BRIAN OXENHAM brian.oxenham@btopenworld.com wrote:
I am using daily build 2017126 to programme a standard baofeng BF888S.
I can change the individual channel power settings through the Power column in the tabular Memories screen which is great. I have verified this actually works with a power meter. However I can't re-designate the Side Key Function as Transmit Power via the Settings screen. It does re-designate that key to the other functions when selected.
Is that a software bug or operator error on my part ?
I just changed the setting of the side key using CHIRP and then read the radio using the factory software to confirm that the side key value was properly set. It was.
Also after setting the side key function to Transmit Power, it is evident that the factory default Monitor setting is no longer available. Pressing the the side key now either causes the radio to emit 1 beep or 2 beeps. I assume the beeps tell the user what the power level was just switched to.
I've checked this on 2 BF-888S radios.
Jim KC9HI
Thanks for the feedback Tom/Jim. Checked mine out again and my error is repeatable. Setting the side Key to Transmit Power just switches it off - no beeps, nothing. Perhaps I should just be grateful that I can actually change the power settings in the tabular memories screen. Too much to hope that there is a serial number on these handsets but they have a small white sticker with the number 8.
B