John,
I've read that article, and it didn't help. I inspected the connection and it should be inserted correctly. The stock software is able to program it correctly, so I suspect it is a software issue. That is why I did the serial port capture.
Richard On 17 Nov 2014 10:11, "John LaMartina ☀" JohnLa@usa.net wrote:
Richard, Let me refer you to http://www.miklor.com/COM/UV_ErrorMess.php I believe that error message may be covered there.
John Http://www.miklor.com
On Nov 17, 2014, at 9:46 AM, Richard Hum hum.richard@gmail.com wrote:
When I try to do "Download from radio" on my UV-B5 with chirp, I get a "Radio did not ack programming mode" error. I did some googling, but all the tips did not help.
I discovered that using the programming software version 1.09 on Miklor did work, so it probably isn't a driver or cable issue. I have driver version 3.2.0.0.
I get the error on both Linux and Windows 7.
In Windows, I did some serial port captures to compare the traffic from the stock software and chirp. Below are those files generated by Serial Port Monitor by Eltima. The HTML files are exported versions so someone without the software could read the output.
Here is a dropbox link to the files: https://www.dropbox.com/sh/hoj7428g4gnjq9x/AAAl8bjPi0vgNKWVm7w0hgyza?dl=0
Best Regards, Richard
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users