I also hate sitting through a youtube video when a few lines of text would have answered a question. This is what works with a Baofeng UV82. I think the same works for other models. - Dale
The three buttons that must be held down:
PTT-A This is the upper button on the left side of the radio.
MON This is the lower button on the left side of the radio.
# This is the lower right button on the radio keypad.
1. Turn off the radio.
2. Press all three of these buttons.
3. Turn on the radio.
4. The radio should display the word “FACTORY” for 5 to 10 seconds.
If the display continues to display “factory” proceed to the next step.
Usually, the word disappears momentarily. If you do not see this displayed
turn off the radio and repeat.
5. Turn off the radio.
6. Turn on the radio and try to transmit on a frequency outside the HAM band such as a GMRS frequency.
On Wed, Apr 17, 2024 at 1:58 PM K0LNY ?? via Users < users@lists.chirpmyradio.com> wrote:
Really? Can't the steps just be written out? Glenn