I’m having to use an adapter to plug in the USB to the MacBook.  Could that be affecting things?  When I enter the command in Terminal it says there is no such file or directory. 

The odd thing is that when I use this adapter with the BaeFeng it works just fine.

Thanks again.

On Mar 26, 2021, at 8:08 PM, Jim Unroe <rock.unroe@gmail.com> wrote:

On Fri, Mar 26, 2021 at 8:57 PM Lawrence Underwood <lawrenceu@gmail.com> wrote:

Do you know where I can download a driver?  Is it a FTDI cable or some sort?

On Mar 26, 2021, at 7:54 PM, Jim Unroe <rock.unroe@gmail.com> wrote:

On Fri, Mar 26, 2021 at 8:49 PM Lawrence Underwood <lawrenceu@gmail.com> wrote:

I am on a MacBook Pro 13 running 11.2.3.

When I attempt to download the radio to Chirp the port that is auto populated is /dev/cu/.Bluetooth-Incoming-Port.
When I put the radio into ADMS mode and attempt to download it I get ‘ERROR’ on the radio and a message stating that the radio did not respond on Chirp.  I am using the cable supplied by Yaesu.

Any ideas on how to get the radio to communicate with Chirp?

Thanks.

See if this helps.
https://www.miklor.com/COM/UV_DriversMAC.php

Jim KC9HI
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Lawrence at lawrenceu@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Nicolas at nicolas@jetblackjelly.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com