NO luck yet. I held the plug in as far as it would go, no change. I turned the volume up all the way, no luck. I closed CHIRP and re-opened as Administrator,still no luck up or downloading.

thanks for your assistance

On August 22, 2020 at 4:11 PM Alan Hill <alan.r.hill@gmail.com> wrote:

Try making sure you vigorously plug the connector into the radio and hold it in while loading from chirp.  Also turn the volume up from minimum.   Last resort run chirp as adminstrator.


On Sat, Aug 22, 2020, 3:45 PM Charles Gierke < cgierke@cox.net> wrote:

On Wednesday my 2 BaoFeng UV 5R radios could download and upload to CHIRP. 

On Friday all I got was the following message:  Radio Did Not Respond.

I tried reloading the latest version of CHIRP, no change.  I tried an earlier version of CHIRP, no change. I reloaded the latest version back, no change.  Visually the radio's red light blinks then the LED display blinks then the error message shows up on CHIRP.


Any suggestions?

Thanks Chuck KJ7INT

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Silver Fox at alan.r.hill@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Chuck at cgierke@cox.net
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com